Default Address - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual
User-defined Modbus Addressing
The input and output address can be configured in a different format on a specific settings page.
Check the "Enable User-defined Modbus Addressing" box, select the Modbus function, and then
configure the start address of each item.
ATTENTION
Disable the user-defined modbus addressing function if using the MXIO(.NET) library or using
Active OPC Server to control or monitor the ioLogik E1200's I/O Status.

Default Address

On this settings page, you can view the default Modbus address for all I/O devices. The page only
displays the start address of each item. For example, if the DI Value starts from 10001, then the 1
DI channel's Modbus address is 10001 and the 2
nd
DI is 10002.
3-5
Using the Web Console
st