Heartbeat Interval - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual
2. On the Create AOPC Tag page, click on the Create Tags button to push the tag configuration
to Active OPC Server Lite.
3. Launch the Active OPC Server Lite program; tags will be automatically created.
4. Save the configuration of the Active OPC Server Ltie when exiting the program.

Heartbeat Interval

Tags are event-driven and updated only when the status of an I/O channel changes. When the
status remains unchanged, the Active OPC Server Lite will not receive updates. To ensure that the
ioLogik is connected and alive, Heartbeat Interval can be used to determine the connection status
between the ioLogik and Active OPC Server Lite. If the heartbeat interval is set and the network
between the ioLogik and Active OPC Server Lite is down, Active OPC Server Lite will detect the
stop of the heartbeat and the Quality column will show BAD to indicate the loss of the connection.
The maximum interval is 65,535 seconds.
5-10
Active OPC Server Lite