Software Installation; Load Factory Default - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual

Software Installation

ioSearch is a search utility that helps the user locate an ioLogik E1200 on the local network. Find the
ioSearch utility in the Document and Software CD under Software
latest version from Moxa's website.
1. Installing from the CD: Insert the Document and Software CD into the host computer. In the
root directory of the CD, locate and run SETUP.EXE. The installation program will guide you
through the installation process and install the ioSearch utility. You can also install the MXIO
DLL library separately.
2. Open ioSearch: After installation is finished, run ioSearch from Start
MOXA
3. Search the network for the server: On the menu bar, select System
Ethernet I/O Server. A dialog window will pop up. Click Start Search to begin searching for
the ioLogik E1200.
If multiple ioLogik E1200 units are installed on the same network, remember that each unit has
the same default IP address. You will need to assign a different IP address to each unit to avoid
IP conflicts.

Load Factory Default

There are three ways to restore the ioLogik E1200 to the factory default.
1. Hold the RESET button for 5 seconds.
2. Right click the specified ioLogik in the ioSearch utility and select "Reset to Default".
3. Select "Load Factory Default" from the web console.
IO Server Utility ioSearch
2-5
Initial Setup
ioSearch, or download the
Program Files
Auto Scan Active