Hardware Reference; Panel Guide; Led Indicators - Moxa Technologies ioLogik E1200 Series User Manual

ioLogik E1200 Series

Hardware Reference

Panel Guide

NOTE The reset button restarts the server and resets all settings to factory defaults. Use a pointed object such as a
straightened paper clip to hold in the reset button for 5 sec. The factory defaults will be loaded once the Ready
LED turns green again. You may then release the reset button.

LED Indicators

LED
Power
Ready
Port 1
Port 2
State Description
Amber System power is ON
OFF System power is OFF
Green System is ready
Flashing Flashes every 1 sec when the Locate function is triggered
Flashing Flashes every 0.5 sec when the firmware is being upgraded
Flashing Cycle on/off period of 0.5 sec. represents "Safe Mode"
OFF System is not ready.
Green Ethernet connection enabled
Flashing Transmitting or receiving data
Green Ethernet connection enabled
Flashing Transmitting or receiving data
1-8
Introduction