Moxa Technologies ioLogik E1200 Series Quick Installation Manual

Moxa Technologies ioLogik E1200 Series Quick Installation Manual

Remote ethernet i/o with 2-port ethernet switch
Hide thumbs Also See for ioLogik E1200 Series:

Advertisement

Quick Links

Pin Assignments

System Configuration

Configuration via Web Console

Main configuration of an ioLogik E1200 is via its
web console.
Default IP Address: 192.168.127.254
Subnet Mask: 255.255.255.0
Be sure to configure the host PC's IP
Note:
address to the same subnet as the ioLogik
E1200. For example, 192.168.127.253
www.moxa.com
Moxa Inc.

ioSearch Utility

ioSearch is a search utility that helps user locate an
ioLogik E1200 on the local network.
Find the ioSearch utility in the Document and
Software CD \ Software \ ioSearch, or download the
latest version on Moxa website.

Load Factory Default

There are three ways to restore the ioLogik E1200
to the factory default.
1.
Hold the RESET button for 5 seconds.
2.
Right click the specified ioLogik in the
ioSearch utility and select "Reset to Default".
3.
Select the "Load Factory Default" at the web
console.

Modbus Address Table

Please refer to the user's manual for details of the
ioLogik's Modbus address, or refer to the start
address of the I/O channels in web console
User-defined Modbus Addressing
Default
Address.
Active OPC Server Connection
Refer to the following steps to connect the ioLogik
E1200 to an Active OPC Server.
1. Disable the user-defined Modbus address
function.
2. Install the Active OPC Server Lite Package
from Document and Software CD
Software
AOPC Lite
ActiveOPCSetup
Install.exe
3. In web console
Active OPC Server
Settings
AOPC & I/O Settings, specify the
IP address where the Active OPC Server is
installed. Specify the I/O channels that need
to be added to the Active OPC Server Lite.
Submit the settings and then Save/Restart.
4. In web console
Active OPC Server
Settings
Create AOPC Tag, click the
"Create Tag" button.
5. Launch the Active OPC Server Lite from
Start
Programs
MOXA
IOServer
ActiveOPC
ActiveOPC. Save the
configuration before exiting the Active OPC
Server Lite program.
ioLogik E1200 Series Quick Installation Guide
ioLogik E1200 Series
Remote Ethernet I/O with 2-port Ethernet
Switch

Overview

The ioLogik E1200 series comes with 2
embedded Ethernet switch ports that can form a
daisy-chain topology, which is the easiest way to
add more Ethernet devices to a network or
connect your ioLogiks in series. Moxa's free
Active OPC Server also offers active (or "push")
communication with Moxa's ioLogik series of
Ethernet I/O products for use with HMI/SCADA
systems, providing instant I/O status reports by
"Active Tags". The event-driven active tags result
in an I/O response time that is 7 times faster than
other OPC Server packages. It also causes an
apparent 80% reduction in network traffic.
Model Selection:
ioLogik
DI
DO
DIO Relay
AI
E1210
16
--
--
--
--
E1211
--
16
--
--
--
E1212
8
--
8
--
--
E1214
6
--
--
6
--
E1240
--
--
--
--
Package Checklist
ioLogik E1200
Documentation and Software CD
Quick Installation Guide

Applications

Factory Facility Monitoring
Factory Environmental Monitoring
Remote Cabinet/Unmanned Site Monitoring
Lighting Control of Buildings
Machine Pre-installation
P/N: 1802012001011

Features

Built-in 2-port Ethernet switch for
daisy-chain topologies
Free support of Moxa's push-based Active
OPC Server Lite
• Seamlessly connect to any SCADA
system
• Save 80% on network bandwidth·
• I/O response that's seven times faster·
User-defined Modbus/TCP addressing
MXIO programming library for Windows
and WinCE VB/VC.NET and Linux C APIs
Web configuration with Import/Export
function›

Specifications

Network:
2 x 10/100 Mbps switch ports, RJ45
I/O Control: Modbus/TCP, OPC Server,
MXIO(.NET) Library
Configuration: Web console, ioSearch
utility
System:
Power Input: 12 to 36 VDC
Power Consumption: 130 mA @ 24 VDC
Operating temperature: -10 to 60°C
(32 to 140°F)
Ambient Relative Humidity: 5 to 95%
Dimensions: 27 × 132 × 84 mm
8
Housing: ABS + PC
Weight: 180 ± 10 g
CE, FCC Class A approval
Warranty: 5 years (excluding E1214)
Sensor Type: NPN, PNP, and Dry contact
I/O Mode: DI or Event Counter
Dry Contact Logic 0 short to GND;
Logic 1: open
Wet Contact:
• Logic 0: 0 to 3 VDC
• Logic 1: 10 to 30 VDC (DI COM to DI)
Counter/Frequency: 250 Hz, power off
storage

Digital Output:

I/O Mode: DO or Pulse Output
Pulse Wave Width/Frequency: 500 Hz
Over-current Limit: 400 mA (typical)
Second Edition.
©2010 Moxa Inc.
All rights reserve

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ioLogik E1200 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Moxa Technologies ioLogik E1200 Series

  • Page 1 Load Factory Default • Save 80% on network bandwidth· The ioLogik E1200 series comes with 2 There are three ways to restore the ioLogik E1200 • I/O response that’s seven times faster· embedded Ethernet switch ports that can form a to the factory default.
  • Page 2 Ethernet cable to either RJ45 port. For safety reasons, the wires attached to Note: the power should be at least 2 mm in diameter. ioLogik E1200 Series Quick Installation Guide ioLogik E1200 Series Quick Installation Guide...

Table of Contents