Introduction To The Web Console - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual

Introduction to the Web Console

The ioLogik E1200 web console is a browser-based configuration utility. When the ioLogik E1200
is connected to your network, you may enter the server's IP address in your web browser to access
the web console.
The left panel is the navigation panel and contains an expandable menu tree for navigating among
the various settings and categories. When you click on a menu item in the navigation panel, the main
window will display the corresponding options for that item. Configuration changes can then be
made in the main window. For example, if you click on Network Settings in the navigation panel,
the main window will show a page of basic settings that you can configure.
You must click on the Submit button after making configuration changes. The Submit button will
be located at the bottom of every page that has configurable settings. If you navigate to another page
without clicking the Submit button, your changes will not be retained.
Submitted changes will not take effect until they are saved and the ioLogik E1200 is restarted!
You may save and restart the server in one step by clicking on the Save/Restart button after you
submit a change. If you need to make several changes before restarting, you may save your changes
without restarting by selecting Save/Restart in the navigation panel. If you restart the ioLogik
E1200 without saving your configuration, the ioLogik E1200 will discard all submitted changes.
3-2
Using the Web Console
Main
Window
Navigation
Panel