Export System Config; Change Password; Load Factory Default - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual

Export System Config

On the Export System Config page, you can save the ioLogik's configuration into a file for backup
or import into another ioLogik server.

Change Password

For all changes to the ioLogik E1200's password protection settings, you will first need to enter the
old password. Leave this blank if you are setting up password protection for the first time. To set up
a new password or change the existing password, enter your desired password under both New
password and Confirm password. To remove password protection, leave the New password and
Confirm password fields blank.
ATTENTION
If you forget the password, the ONLY way to configure the ioLogik E1200 is by using the reset
button to load the factory defaults.
Before you set a password for the first time, it is a good idea to export the configuration to a file
when you have finished setting up your ioLogik E1200. Your configuration can then be easily
imported back into the ioLogik E1200 if you need to reset the ioLogik E1200 due to a forgotten
password or for other reasons.

Load Factory Default

This function will reset all of the ioLogik E1200's settings to the factory default values. All previous
settings, including the console password will be lost.
3-16
Using the Web Console