Rtd Channels - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual

RTD Channels

The current status of each RTD (Resistance Temperature Detector) channel can be viewed on the
RTD Channel page.
Click on a specific channel to access the RTD channel settings.
Select the "Enable RTD Channel" box and then select the sensor type that meets the physical
attachment to the ioLogik E1200.
The ioLogik E1200 allows you to calibrate the temperature sensors. In each channel configuration
section, follow the instructions and click Calibrate button to start the RTD sensor calibration.
Each calibration requires around 30 seconds (per channel).
3-11
Using the Web Console