Tag Generation - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual

Tag Generation

Tag configuration of an ioLogik E1200 is specified by its web console. Open the browser and go
to the Active OPC Server Settings page.
Follow these steps to create the tag from the ioLogik E1200 to Active OPC Server Lite:
1. In the AOPC & I/O Settings page,
a.
b.
c.
d.
Check the "Enable Active OPC" box and specify the IP address where the Active OPC
Server Lite is installed.
Select the I/O channels that need to be created in the Active OPC Server Lite.
Configure the Heartbeat Interval, if necessary.
Click the "Submit" button and click the Save/Restart button on the next page.
5-9
Active OPC Server Lite