Led Indicators; Top Panel Led Indicators; End Panel Led Indicators - Moxa Technologies NPort W2250A-T-EU User Manual

NPort W2150A/W2250A Series

LED Indicators

Top Panel LED Indicators

Name
Ready
WLAN
Port 1
Port 2
Signal Strength
(5 LEDS)

End Panel LED Indicators

Name
Ethernet
Color
Steady on:
Red Blinking:
Steady on:
Green
Blinking:
Off Power is off, or a power error condition exists.
Steady on:
Green Blinking:
Off Wireless not enabled.
Orange Serial port is receiving data.
Green Serial port is transmitting data.
Off No data is flowing to or from the serial port.
1 Red - the signal strength (RSSI) is worse than -88 dBm
Red
2 Red - the signal strength (RSSI) is between -87 to -79 dBm
3 Green - the signal strength (RSSI) is between -78 to -68 dBm
Green 4 Green - the signal strength (RSSI) is between -67 to -60 dBm
5 Green - the signal strength (RSSI) is between -59 to -45 dBm
Color
10 Mbps Ethernet connection
Orange
Green 100 Mbps Ethernet connection
Off Ethernet cable is disconnected
2-3
Function
Power is on, and the NPort is booting up.
An IP conflict exists, or the DHCP/ BOOTP server did not
respond properly.
The NPort is functioning normally.
The unit is responding to Locate function.
Wireless enabled
The NPort can't establish WLAN connection with AP
(Infrastructure) or station (Ad-Hoc)
Function
Getting Started