Overview; Network Settings; General Settings - Moxa Technologies ioLogik E1210 User Manual

ioLogik E1200 User's Manual

Overview

The Overview page contains basic information about the ioLogik E1200, including the model name,
serial number, firmware version, MAC address, and current IP address. Most importantly, you can
see the current I/O status by hitting the F5 key on the computer keyboard to refresh the page.

Network Settings

General Settings

On the General Settings page, you can assign a server name and location to assist you in
differentiating between different ioLogik E1200 units. You may also configure the Modbus/TCP
idle interval or enable the Communication Watchdog function.
The Connection Watchdog activates the safe status (Safe Mode) when the ioLogik E1200 loses its
network connection for the specified amount of time. Safe Mode is designed especially for products
that have output channels to output a suitable value or status when the ioLogik E1200 cannot be
controlled by a remote PC (due to network failure, for example). By default, the Watchdog is
disabled. Users can configure how each output channel responds on the I/O Settings page.
To enable the Watchdog, check Enable connection watchdog, set the timeout value, and then
restart the server. With Watchdog enabled, the ioLogik E1200 will enter Safe Status after there is a
disruption in communication that exceeds the time specified.
3-3
Using the Web Console