ioLogik R2110 Series User's Manual
3. DO sink type
* DO PWR is for powering up the field power LED
LED Indicators
LED
System LEDs
PWR
Ready
Serial
DI/O LEDs
DI ×12 pins
DO × 8 pins
Field PWR
Factory Default Settings
The ioLogik R2110 is configured with the following default settings:
Default RS-485 Unit ID:
Default communication baudrate: 115200 bps
ioAdmin
ioAdmin is a Windows utility used to configure the ioLogik R2110, export your settings, and
monitor the ioLogik R2110 remotely.
Red
The power is on.
Red
There is a system error.
Green
The ioLogik is functioning normally.
Off
The power is off or a power error condition exists.
Flashing
The ioLogik is in safe status.
Red/Green
Blinking
The serial port is receiving and transmitting data.
In
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
Out
0, 1, 2, 3, 4, 5, 6, 7
Field power
2-3
Description
1
Hardware Installation