Table of Contents
Advertisement
(5) Setting common data for the production support function
"@. 2-2. displays on the screen for the production support function"
* Refer to
cedure to be taken untl ths screen s dsplayed.
Items commonly appled to each producton support functon are set on the producton support common set-
tng screens No. and No. 2.
(5)-1 production support common setting screen No. 1
Input data on tems 1 to 5 referrng to the table gven below.
When Enter swtch 6 is pressed, the input data is confirmed. When Cancel swtch 7 s pressed, the n-
put data s cancelled and the screen s restored to the prevous screen.
No.
Item to be set
Acceptable number of
1
sttches for count-up
T h e n u m b e r o f t m e s
2
of thread trmmng per
count
Enable/dsable of count
3
by thread trmmng
Dsplay method selector
4
swtch
Restng status
5
1 2 3 4 5
1 2 3 4 5
When the sewng machne stops after thread trmmng and the number of sewn
sttches exceeds the preset number of sttches, an nput of the count-up of pro-
ducton volume s accepted.
Settng range : 0 - 99
* Input of the producton volume count-up :
Producton volume count-up swtch and the optonal producton management
swtch nput, dsplayed on each producton support screen under the normal sew-
ng mode.
Ths settng s used for preventng ncorrect nput or fraudulent nput.
The number of tmes of thread trmmng per count on the producton volume
counter s set.
Settng range : - 999
* Ths settng s used n the case of automatc count up by the thread trmmng
operaton wthout usng the producton volume counter.
Enable/dsable of the automatc count-up of the producton volume counter and
the quantty of sewn tems counter.
Enable
* When ths tem s set to the enable, the number of tmes of thread trmmng de-
scrbed n 2 s referred.
The unt employed to dsplay the tme data on each producton support functon
screen s set.
: Dsplayed n second
Intal settng : Dsplayed n second
On each producton support functon screen, the measurement of the operatonal
status of the sewng machne and recordng of data can be temporarly halted.
Ths halt status s set.
Measurement s at halt :
Measurement s at halt and startng of the sewng machne s prohbted :
– –
7
6
description
Intal value : 0
Intal value :
Dsable
Intal settng : Dsable
for the operatng pro-
: Dsplayed n mnute
Advertisement
Table of Contents
