Table of Contents
Advertisement
6-8. Initialization of the function setting data
The function setting data you have changed arbitrarily can be stored in memory. If you change the data after-
ward, it can be returned to the aforementioned data that you have stored in memory.
❸
❹
B
❸
❹
❶
❷
1) If you simultaneously hold down
❹ or turn ON the power to the sewing machine
while simultaneously pressing
❹ under the normal state of sewing, the initializa-
tion screen "RST" (B) will be displayed.
2) After you have kept
pressed simultaneously to display the initialization
screen, all set values can be initialized to those
stored in memory as described in
setting" p.32
by pressing
In the case you have turned the power ON by press-
❸ and
ing
values will be reset to the factory-set initial values
at the time of shipment. In this case, the set values
you have stored in memory as described in
Function setting" p.32
the factory-set values.
Initialization can be cancelled by pressing
3) During the initialization, the full-screen is displayed.
After the completion of the initialization, the screen
returns to the normal sewing-state screen.
– 54 –
❸ and
❸ and
❸ and
❹ held
"6-3. Function
❷
❹ simultaneously, the set
"6-3.
will also be initialized to
❶ .
Advertisement
Table of Contents
