JUKI IT-100 Instruction Manual page 23

Switch
Edge sensor switch
❼
One-shot automatic sewing
❽
switch
With/without automatic thread
trimmer switch
❾
Thread trimming prohibiting

switch
Backlight switch

Reset switch

Information switch

Plus switch

Minus switch

Counter/speed changeover

switch

General-purpose switch

Power display lamp
Selects use/disuse of the material edge sensor in the case the
material edge sensor (edge) is installed on the sewing machine
When this switch is pressed, the sewing machine automatically
operates until the material edge sensor detects the material edge
or until the set number of stitches is reached.
This switch is used to automatically trim the thread when the ma-
terial edge sensor detects the material edge or until the set num-
ber of stitches is reached.
* This switch cannot be used with the sewing machine which is not
provided with the automatic thread trimming device.
This switch prohibits all thread trimmings.
* This switch cannot be used with the sewing machine which is not
provided with the automatic thread trimming device.
This switch is used to change over the operation of the backlight
of the LCD between ON and OFF.
This is the switch to make the value of bobbin thread counter or
sewing counter the set value. This switch is enabled after thread
trimming.
This switch is used to change over the screen between the in-
formation function screen (sewing common data mode, function
setting mode, communication mode, version display, etc.) and the
normal sewing screen.
This switch is enabled after thread trimming.
This switch is used to increase the set value of the bobbin thread
counter or the number of pcs. counter at the time of setting. It
should be remembered that this switch is enabled after thread
trimming.
This switch is used to decrease the set value of the bobbin thread
counter or the number of pcs. counter at the time of setting. It
should be remembered that this switch is enabled after thread
trimming.
This switch is used to change over the display between the count-
er display and the maximum sewing speed limitation display.
This switch has different functions depending on the screen.
This lamp lights up when the power switch is turned ON.
– 20 –
Description