Table of Contents
Advertisement
No.
Item
58 Function of holding
Function of holding predetermined upper/lower position of the needle bar
predetermined upper/
lower position of the
needle bar
59 Function of Auto/
This function can specify the sewing speed of reverse feed stitching
Manual change-
at the start of sewing.
over of reverse feed
stitching at the start
of sewing
60 Function of stop
Function at the time of completion of reverse feed stitching at the
immediately after
start of sewing
reverse feed stitching
at the start of sewing
64 Change-over speed
Initial speed when starting condensation stitch or EBT
of condensation stitch
or EBT (end back
tack)
70 Function of soft-down
Presser foot is slowly lowered.
of presser foot
71 Double reverse
This item is not used on the IT-100.
feed stitching
function
72 Sewing machine
Current limit at the startup of sewing machine is specified.
startup selecting
function
73 Retry function
This function is used when needle cannot pierce materials .
74 With/without thread
With/without thread trimmer for MF is selected.
trimmer for MF
*
76 One-shot function
This item is not used on the IT-100.
Suction motion time of presser foot lifting solenoid
84 Initial motion suction
*
time of presser foot
lifting solenoid
Pedal curve is selected. (Improving pedal inching operation)
87 Function of pedal
curve selection
Sewing speed
Automatic UP stop function is set immediately after turning ON the power.
90 Initial motion up stop
function
91 Function of prohibiting
It is effective in combination with the machine head provided with
compensation operation
tension release function.
after turning handwheel by
hand
92 Function of reducing
Function to reduce speed at the time of completion of reverse feed
speed of reverse feed
stitching at the start of sewing.
stitching at the start
of sewing
93 Function added to
Operation of needle up/down compensating switch is changed after
needle up/down
turning ON the power or thread trimming.
compensating switch
94 Continuous + One-
The function that does not stop the sewing machine by combining
shot nonstop function
continuous stitching with one-shot stitching using the program sew-
ing function which is available in the operation panel.
95 Head selection
Machine head to be used is selected.
function
(When the machine head is changed, each setting item is changed to
the initial value of the machine head.)
96 Max. sewing speed
Max. sewing speed of the sewing machine head can be set. (The
setting
MAX value differs by machine head.)
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions.
Description
0 : Not provided with the function of holding predetermined up-
per/lower position of the needle bar
1 : Provided with the function of holding predetermined upper/low-
er position of the needle bar (holding force is weak.)
2 : Provided with the function of holding predetermined upper/low-
er position of the needle bar (holding force is medium.)
3 : Provided with the function of holding predetermined upper/low-
er position of the needle bar (holding force is strong.)
0 : The speed will depend on the manual operation by pedal, etc.
1 : The speed will depend on the specified reverse feed stitching speed (No. 8).
0 : Not provided with the function of temporary stop of the sewing
machine at the time of completion of reverse feed stitching at
the start of sewing
1 : Provided with the function of temporary stop of the sewing
machine at the time of completion of reverse feed stitching at
the start of sewing.
0 : Presser foot is rapidly lowered.
1 : Presser foot is slowly lowered.
0 : Normal (Current limit is applied during startup)
1 : Rapid (Current limit is not applied during startup)
0 : Normal
1 to 10 : Retry function is provided.
0 : Not provided with the tread trimmer
1 : Provided with the thread trimmer
2
0
1
0 : off
1 : on
0 : Tension release function is ineffective.
1 : Tension release function is effective.
0 : Speed is not reduced.
1 : Speed is reduced.
0 : Normal (needle up/down compensating stitching only)
1 : One stitch compensating stitching is performed only when
aforementioned changeover is made. (Upper stop → upper
stop)
0 : Normal (The sewing machine stops when a step is complet-
ed.)
1 : The sewing machine does not stop when a step is completed
and proceeds to next step.
Pedal stroke
– 43 –
Setting range
Indication of function setting
HPOS
0 to 3
SBTO
0/1
SBTQ
0/1
S-WAIT
0 to 250
(sti/min)
0/1
F-SDFL
0/1
F-ACRA
0/1
F-ACR
0 to 10
F-RET
0/1
0/1
DM
T-PUT
50 to 500
(ms)
F-PCS
0/1/2
NUO
0/1
F-PMAT
0/1
F-DSBT
0/1
F-MADF
0/1
F-SBTC
0/1
150 to MAX
S-MAX
(sti/min)
Advertisement
Table of Contents
