Pitch Time Monitor Screen No. 2 - JUKI IT-100 Instruction Manual

(3) pitch time monitor screen No. 2

<pitch time monitor screen No. 2>
On the ptch tme montor screen No. 2, the total producton volume and the average ptch tme n the con-
tnuous secton selected on the ptch tme montor screen No.  are measured and dsplayed. (Sectons
A and B in the figure given below) In addition, the display method employed on the pitch time monitor screen
No. 1 is specified.
4
Switch/display
A Total producton The total producton volume n the contnuous secton
volume dsplay tor screen No.  s dsplayed.
(Cauton) The producton volume s approxmately 3200 at the maxmum due to the restrcton
B A v e r a g e p  t c h The average ptch tme n the contnuous secton
screen No.  s dsplayed. It should be noted, however, that ptch tme data equal to or longer
tme dsplay
than 00 seconds (30 mnutes) s judged to be abnormal sewng work and s excluded from
calculaton.
G r a p h m o d e The mode of graph dsplayed on the ptch tme montor screen No.  s changed over.
1
c h a n g e o v e r
Producton volume graph mode :
swtch
Vertcal axs : Producton volume
Horzontal axs : Workng tme of day
Graph's horzon- The range of the horzontal axs (tme unt n one secton) of the graph dsplayed on the ptch
2
t a l a x  s r a n g e tme montor screen No.  s set.
settng swtch ・ Under the producton volume graph mode :
・ Under the ptch tme graph mode:
Graph's vertcal The range of the vertcal axs of the graph dsplayed on the ptch tme montor screen No.  s set.
3
r a n g e s e t t  n g Settng range: 0, 20, 50, 00, 200, 500, 000, 2000, 3000, 5000, auto Intal settng : auto
swtch * In the case of "auto," the range s automatcally selected to dsplay the producton volume on
Producton volume The producton volume s counted up wth one tem added.
4
count-up swtch
Clear swtch The ptch tme montor data recorded n the sewng machne memory are cleared.
5
* When this switch is pressed, the clear confirmation popup screen appears. Press
M e a s u r e m e n t Measurement and recordng of sewng machne operaton data are stopped.
6
stop swtch
When measurement s beng carred out,
When measurement s n the stop status,
Dsplay changeover The ptch tme montor screen No.  s dsplayed.
7
swtch to dsplay the
ptch tme montor
screen No. 
B
1 2 3
A
1
2 3
by the ptch tme montor data capacty.
Settng range : 0 m, 5 m, 20 m, 30 m,  h, 2 h, 4 h,  h, 2 h,  d
* "m" represents mnute, "h" represents hour and "d" represents day.
Settng range : 3 s, 5 s, 0 s, 5 s, 20 s, 30 s,  m
* "s" represents second and "m" represents mnute.
the vertcal axs as large as possble at all tmes.
to clear the data, or swtch to cancel clearng.
5 6
7
description
Ptch tme graph mode :
Vertcal axs : Producton volume
Horzontal axs : Ptch tme
s dsplayed.
s dsplayed.
– 5 –
selected on the ptch tme mon-
selected on the ptch tme montor
Intal settng : 30 m
Intal settng : 5 s
swtch