Table of Contents
Advertisement
4-12. function setting
Functons of the sewng machne can be programmed and the number of sttches and the sewng speed can
be changed.
Refer to the Instructon Manual for the SC-920 for how to change the functon settng tems and for the detals
of the functons.
[function settings list screen]
2
[function setting display screen]
3
4
[function setting popup screen]
Example) �To change the number of sttches 0 to 3 usng the soft-start functon (functon settng No. )�
[function setting display screen]
3
4
1
f u n c t i o n
setting No.
Set value
5
6
7
8
5
) Keepng swtch 1 held pressed, turn the
power ON. Then the screen s changed over
to the functon settngs lst screen.
When you press swtch 2 , the screen s
changed over to the functon settng dsplay
screen.
The function setting list screen can be
displayed from the information screen
(maintenance personnel level). Refer
to
"$-2. MAINTENANCE pERSONNEL
LEvEL".
2) Functon settng tem number can be ncre-
mented or decremented by pressng swtches
3 and 4 .
3) Once you have determned the target functon
settng number, press swtch 5 . The screen
s changed over to the functon settng popup
screen.
4) Functon settng tem number can be ncre-
mented or decremented by pressng swtches
6 and 7 .
5) Once you have completed set value changng,
press swtch 8 . The screen s changed over
to the functon settng dsplay screen and the
changed set value s dsplayed on the screen.
) Turn OFF the power swtch to ext from the
functon settng.
*
To change two or more dfferent functon
settng numbers, repeat the aforementoned
steps of procedure 2) through 5) as requred.
) Press swtches 3 and 4 to select functon
settng No. .
2) Press swtch 5 . The screen s changed over
to the functon settng popup screen.
– 39 –
Advertisement
Table of Contents
