Working Measurement Function - JUKI IT-100 Instruction Manual

(2) working measurement function

■ Sewing management function screen
1
) Press swtch 1 to change over the screen to the workng measurement functon screen.
■ working measurement function screen
Workng factor, workng mean speed, ptch tme and machne tme can be measured on ths screen.
[Explanation of the respective items]
Workng factor ..................................Unt : %
Workng mean speed .......................Unt : st/mn
Ptch tme .........................................Unt : Second
Machne tme ...................................Unt : Second
2) Press 3 to start the workng measurement.
3) To stop the measurement, press 3 agan.
4) The result of measurement can be cleared wth 2 .
when "Clear" is not executed, the measurement from the last time can be continued.
– 9 –