JUKI IT-100 Instruction Manual page 19

Input of working hours 3
Input of working hours 3
Input of resting times 4, 5 and 6 4
Input of a work break 5
Input of a work break 5
* Secton A dsplays the actual workng hours obtaned by subtractng the restng tme from the length of
tme elapsed from the startng to the end of daly work.
It is possible to load the data edited by means of the IA-1 as the working hours setting data.
In the case of using a USB thumb drive, turn the power ON with a medium registered in a given
folder inserted, the data on the medium will be automatically loaded onto the personal computer.
The working hours data cannot be output from the IT-100.
Setting is completed 6
A
3) Input the workng hours :00 to
4) Set the restng tme
5) Input the lunch break 2:00 to
) Settng s completed.
–  –
:00.
Select the nput of data on rest-
ng tmes 4 , 5
.
3:00.
Input the work break 0:00 to
0:0.
Input the work break 5:00 to
5:0.
and