Table of Contents
Advertisement
Explanation of displayed information and operating switches on the sewing recorder screen No. 1
Switch/display
A
Sewing recorder graph
display
B
Sewing recorder screen No.
1
C
Sewing recorder screen No.
2
D
Pitch time display of data
in the screen
❶
Production volume count-
up switch
❷
Active data selector switch
❸
Graphs Nos. 1 and 2 dis-
play/non-display change-
over switch
❹
Right/left scroll switch
❺
Latest work data display
switch
❻
D i s p l a y c h a n g e o v e r
switch to display the sew-
ing recorder screen No. 2
❼
Production volume count-
er correction switch
The graph the vertical axis of which shows the sewing speed and the horizontal
axis of which shows the time is displayed. The ranges of the vertical and hori-
zontal axes can be set on the sewing recorder screen No. 2.
Point △ represents the sewing starting point, thread trimming point or the man-
ual-switch pressing point in the data No.1.
Point ▲ represents the starting and end points of the pitch time of the data
No.1.
Point □ represents the sewing starting point, thread trimming point or the man-
ual-switch pressing point in the data No.2.
Point ■ represents the starting and end points of the pitch time of the data
No.2.
The sewing recorder data No. 1 is shown on the graph in solid lines --------.
The sewing recorder data No. 2 is shown on the graph in dotted lines -----.
The pitch time of the sewing work in which the last thread trimming, on the cur-
rent screen, is performed is displayed.
Upper display : Data No. 1
Lower display : Data No. 2
The production volume is counted up with one item added.
Active data (data to be shifted with switch ❹ or ❺ , data to be additionally re-
corded when sewing operation is carried out, or data which can be cleared with
Clear switch
on the screen No. 2) is selected.
Setting only data No. 1
to be active :
Graphs No. 1 and No. 2 are respectively changed over between the display and
non-display.
Display :
Data graph that is set to be active is displayed with scrolled to the right or left.
The latest work of the data which is set to be active is displayed in a graph from
the beginning of sewing.
The sewing recorder screen No. 2 is displayed.
The production volume can be corrected by increasing/decreasing the number
shown on the counter in increments of 1.
– 59 –
Description
Setting only data No. 2 to
be active :
Non-display :
Setting both data to be
active :
Advertisement
Table of Contents
