6-6. Initialization of the function setting data
The function setting data you have changed arbitrarily can be stored in memory. If you change the data after-
ward, it can be returned to the aforementioned data that you have stored in memory.
❶
1) The initialization screen is displayed by keeping
❸
❹
2) In the case you have kept
❷
3) During the initialization, the full-screen is displayed.
– 34 –
❸ held pressed for five seconds in the nor-
mal sewing state or by turning ON the power to the
sewing machine while pressing
❹ simultaneously.
a long time to display the initialization screen, all of
the set values can be initialized to those you have
stored in memory as described in
setting" p.27
by pressing
ization screen.
In the case you have turned the power ON by press-
❸ and
ing
values will be reset to the factory-set initial values
at the time of shipment. In this case, the set values
you have stored in memory as described in
Function setting" p.27
the factory-set values.
Initialization can be cancelled by pressing
After the completion of the initialization, the screen
returns to the normal sewing-state screen.
❸ and
❸ held pressed for
"6-3. Function
❷ on the initial-
❹ simultaneously, the set
"6-3.
will also be initialized to
❶ .