Changing Model Materials Without Flushing - Stratasys J750 User Manual

Stratasys J750 User Guide

Changing Model Materials Without Flushing

You can change the Model materials without flushing. Use this option when
the color or mechanical properties of the printed model are unimportant.
To change Model materials without flushing:
1. In the Material Replacement Options screen, click Advanced Settings.
2. In the Advanced Settings screen, select Manual slot selection and click
3. When the Material Replacement Options screen opens, select the Replace
DOC-08010 Rev. E
Apply.
Figure 6-14 Manual slot selection
materials without flushing check box and click Apply.
Figure 6-15 Replace materials without flushing
6 Operating and Maintaining the J750 3D Printer
6-17