Custom Material Palettes - Stratasys J750 User Manual

Stratasys J750 User Guide
4. Click in the Color Picker and use the mouse to select a color.
The "actual color" is the closest color to the selected color that can be printed.
Figure 5-21
You can save the new custom color (material combination) and often-used
base materials and digital materials in custom palettes (see below).
You can keep a collection of often-used base materials, digital materials and
Custom
custom colors (material combinations) in custom palettes. This allows you to
Material
easily apply them when preparing models for printing.
Palettes
To create or edit a custom material palette:
1. Select an object on the build tray.
2. In the Model Properties panel, select a material—a base material or a
DOC-08010 Rev. E
❒ The selected object on the build tray changes color.
❒ The Red, Green, and Blue fields update to show the new RGB values.
❒ You can enter exact RGB values, if required.
❒ If VeroClear material is available, you can adjust the opacity
(translucence) of the color applied to the model.
❒ The Selected and Actual color swatches change to show the selected
color and the result in the printed model.
Color picker result
digital material—or set a custom color.
You can set a custom color with the Color Picker or with the
Red/Green/Blue controls.
5 Using PolyJet Studio
5-17