Stratasys J750 User Guide
21. With your fingers, make sure that the new head is level and even with the
22. C onfirm that the heads are level by selecting the check box in the
23. I n the next wizard screen, confirm that you have removed all tools and
24. C lose the printer cover.
DOC-08010 Rev. E
other heads.
Figure 6-85 Checking the level of the new head
following wizard screen, and click Next.
Figure 6-86 Installation-check screen
objects from the printer.
Figure 6-87 Cleared-tray confirmation screen
6 Operating and Maintaining the J750 3D Printer
6-60