Stratasys J750 User Manual page 49

Stratasys J750 User Guide
Figure 5-22 Selecting a material or color
3. Click Add to palette.
Figure 5-23 Custom Palette dialog box
4. When creating a palette, click Enter new palette, type a name and click
5. When adding the selected material to an existing palette, click the palette
DOC-08010 Rev. E
The Custom Palette dialog box opens.
OK.
The dialog box closes, and the new palette, with the selected
material/color, is added to the Filter by list.
name and click OK.
The dialog box closes, and the selected material is added to the palette.
5 Using PolyJet Studio
5-18