Opening Tray Files; Objtf Files 5 - Stratasys J750 User Manual

Stratasys J750 User Guide
Opening Tray
You can open trays that were saved as objtf files (see "Saving Trays " on
Files
page 5-39).
The objtf file contains instructions for printing—which files to print and their
position on the build tray. Because the objtf file references the stl and vrml files
used, they must remain in the same file location as when the objtf file was
saved.
To place an object saved as a tray file (objtf) on the build tray:
1. From the File tab, click Open and select Open Tray.
2. Select the desired file, and make sure that it appears in the File name field.
3. Click Open.
DOC-08010 Rev. E
The Open dialog box appears.
Figure 5-29 The Open dialog box
The Select Printer dialog box appears.
PolyJet Studio opens the tray file.
5 Using PolyJet Studio
5-23