Terms Used In This Guide - Stratasys J750 User Manual

Stratasys J750 User Guide
Terms Used in This Guide
Build tray
Cleaning fluid
Client/user workstation
Connex™
Digital Material
Digital Material Mode
Manager™
Mixed part
Mixed tray
Model material
OBJTF
OBJZF
Printer computer
Printer software
DOC-08010 Rev. E
In PolyJet Studio software: The surface displayed on the
screen that represents the actual build tray in the printer.
In the printer: The surface upon which models are produced.
Cleanser for flushing material feed tubes and the printing block,
used to completely remove Model and Support material from
the system before loading another type of material in the
printer and before long-term shutdown. The cleaning fluid is
supplied in standard material cartridges.
The workstation on which s oftware is installed for preparing
build trays for production on PolyJet printers. (There is no limit
to the number of client workstations in the local network.)
The technology of printing models by jetting multiple materials
simultaneously from the print heads. This technology enables
J750 printers to print in Digital Material mode.
Combinations of model materials fabricated in the printer from
the basic model materials installed.
The printer mode used to print a job using two different model
materials. (This mode can also be used to eliminate the need for
performing the Material Replacement procedure when printing
with a single model material.)
The part of PolyJet Studio software that manages production
jobs before they are sent to the PolyJet printer.
Models whose parts are printed using more than one model
material.
A build tray containing objects, each of which is designed to be
printed using a different model material.
Material used for building models.
PolyJet Studio™
printers.
The extension of a file that contains all of the information
needed for a model-printing job on PolyJet 3D printers. An
objtf file is used by PolyJet Studio to send a print job to a
PolyJet 3D printer.
The extension of a compressed "wrapper" file containing all of
the files used in an PolyJet Studio build tray. Using objzf files, a
printing job can be saved as a single file, for convenient storage
and transfer.
The computer inside the J750 printer that operates it.
Printer interface
printer.
Software running on the computer inside the J750 printer, that
controls all printer operations.
1 About This Guide
Software that prepares f iles for
printing on Stratasys PolyJet
The GUI (graphical user interface)
used for controlling the J750
1-3