Stratasys J750 User Manual page 82

Stratasys J750 User Guide
Figure 6-1 The J750 3D Printer
Starting the Printer
Caution
l
l
1. Turn on the main power switch, located at the back of the printer.
DOC-08010 Rev. E
Do not attempt to operate the printer before being trained by a Stratasys
customer-support representative.
Observe all safety warnings and follow the safety guidelines described in
Chapter 2.
Figure 6-2 Main power switch and cable
6 Operating and Maintaining the J750 3D Printer
6-3