Stratasys J750 User Manual page 144

Stratasys J750 User Guide
UV Sensor
The following steps apply when using the Stratasys UV sensor box that you
Connected to
connect to the printer. They do not apply when using a U V external radiation
Printer
measuring device.
1. To synchronize the wizard and the UV sensor, enter the CF number from
DOC-08010 Rev. E
the label on the back of the UV sensor box and click Next.
Figure 6-95 UV sensor synchronization
Figure 6-96 Label on the bottom of the UV sensor box
6 Operating and Maintaining the J750 3D Printer
6-65