Stratasys J750 User Guide
Manually
You can change the position of objects on the build tray. Considerations for
Repositioning
positioning objects are presented in "Manual Positioning" on page 5-27.
Objects
To manually reposition an object:
1. Select an object by clicking it on the build tray, or selecting it in the Tray
2. Click and drag the object to move it on the build tray.
Figure 5-36 Moving an object on the build tray
Re-aligning
Objects
To re-align an object:
1. Select an object on the build tray.
2. Display the Home ribbon and click Align to Plane
3. Click on the plane of the object you wish to re-align.
DOC-08010 Rev. E
Explorer.
A frame appears around the object.
The plane-alignment toolbar is displayed for the selected plane.
5 Using PolyJet Studio
.
5-30