Work Configurations - Stratasys J750 User Manual

Stratasys J750 User Guide

Work Configurations

The J750 3D printing system can be set up as a single-station system or as a
multi-station system. When connected to a local computer network, the
system can serve multiple users. In such configurations, each user
workstation (client) prepares files f or production. A software service installed
on the printer computer acts as a job manager that sends production jobs to
the printer for production.
Figure 3-2 shows the printer set up in a multi-client configuration.
Figure 3-2 Multi-client network configuration
When installing PolyJet Studio, you choose whether to install it either as a
client station or as a master (server or standalone) station.
PolyJet Studio receives jobs in the order they were sent. In multi-workstation
configurations, the operator of the server—typically the production
administrator—has total control over the jobs sent to the 3D printer, and can
prioritize and delete jobs, review job history and reprint a job, and so on.
DOC-08010 Rev. E
3 Introducing the J750 3D Printing System
3-3