Input Configuration Menu - Extron electronics MediaPort 200 User Manual

Input Configuration Menu

The
Input Configuration
Rotate the horizontal and vertical
Figure 70 below shows the selections available from this menu.
NOTE: The streaming USB video resolution output from the MediaPort 200 is
determined by the host UC software based on available PC resources and network
conditions (see
TIP: The size of the far end UC application window affects the streaming USB video
resolution and should be maximized for the highest resolution.
Configuration
HDMI Input EDID
Next
Select an EDID for the HDMI input.
• Default: 720p@60Hz
• See the Input EDID table on
page 37 for available EDIDs.
Figure 70.
menu enables adjustments to be made to the input signal.
Adjust
USB Video
on page 5 for more information).
Picture
Control
Menu
Input Turn either
Adjust
to select a setting.
Next
H
Next
720p@60Hz
View the active lines and pixels for the input.
Active Pixels (H)
HDCP Authorized
Disabled
Enable or disable HDCP authorization.
• Enabled
• Disabled (Default)
Input Configuration Menu
knobs to set the values for the current selection.
knob
Active V
Next
1024 0768
Active Lines (V)
Auto Memory
Next
On
Enable or disable Auto Memory.
• On (Default)
• Off
MediaPort 200 • Front Panel Operation
Aspect Ratio
Fill
Next
Specify how much of the
display the image will fill.
• Fill (Default)
• Follow
70