Extron electronics MediaPort 200 User Manual page 152

Figure 101. Firmware Update Message Window
When the update is completed, the message window closes and the message
Firmware Upload Complete
In the LCD window,
When the update is complete, the window shows the current firmware version
briefly and then returns to the default cycle.
Passwords — From this panel administrator and user passwords can be set or
E
removed.
NOTES:
• An administrator password must be in place before a user password can be
assigned.
• Passwords must contain 4 to 12 alphanumeric characters. Symbols and
spaces are not allowed, and the passwords are case sensitive.
Setting a password
To assign a password:
1. In the panel, click
Passwords
2. If requested, enter a Login ID. The default is
3. Enter the new administrator password in the
4. Repeat the password in the
Figure 102. Passwords Dialog Box with Administrator Password Entered
appears near the top of the screen.
is displayed while the unit is rebooting.
Extron MediaPort 200
. The
Set Passwords
Admin
Administrator Password
Confirm Password
MediaPort 200 • Remote Configuration and Control
dialog box opens.
.
field.
field (see figure 102 below).
145