Extron electronics MediaPort 200 User Manual page 146

Command
View soft limits
Group Master Name
Set name
View group master name
Group Master Value
NOTE:
For gain value with a resolution up to 0.1, multiply by 10. For mute values, use 0 or 1.
Set dB value
Set mute value
Increment the value
Decrement the value
View group master value
X11*
= Processor indicator range (object ID or OID, see
NOTE:
X12)
= Group number (name): 1 - 16.
ASCII Command
(Host to Processor)
E X11$ }
L GRPM
E X11$ }
N * name GRPM
NOTE:
Maximum name length is 16 characters. Invalid characters include:
= ~ , @ ' [ ] { } X > ` " ; : | \ ?
E X11$ }
N GRPM
E X11$ X11* }
D * ± GRPM
E X11$ X11* }
D * ± GRPM
E X11$ X12) }
D * + GRPM
E X11$ X12) }
D * - GRPM
E X11$ }
D GRPM
Response
(Processor to Host)
X11^ X11& ]
*
With tagged responses
(verbose modes 2 and 3):
X11$ X11^ X11&
Grpm L * *
]
X11$ ]
Grpm N *
]
name
With tagged responses
(verbose modes 2 and 3):
X11$ ]
Grpm N * name
X11$ X11* ]
Grpm D *
X11$ X11* ]
Grpm D *
X11$ X11* ]
Grpm D *
X11$ X11* ]
Grpm D *
X11* ]
With tagged responses
(verbose modes 2 and 3):
X11$ X11* ]
Grpm D *
Gain Level Range table
MediaPort 200 • Remote Configuration and Control
Additional Description
X11^
View high soft limit
X11&
and low soft limit for
group X11$ .
X11$
Set a name for group
View the name of group
X11$
.
X11*
Set the mute value to
X11$ X11*
of group . can
be positive or negative.
X11*
Set the gain value to
X11$ X11*
of group . For :
0 = unmuted
1 = muted
View group master value
X11* X11$
for group .
on page 135).
139
.