Extron electronics MediaPort 200 User Manual page 74

Figure 67 below provides an overview of the
Quick
Setup
Menu
Input Rotate either
Presets knob to select a setting.
Next
Recall Preset
Next
<N/A>
Select an input preset.
• N/A (Default)
Range: 1-16
•
Figure 67. Input Presets Menu
Saving or Recalling an Input Preset
1. Press the button until
Menu
2. Press the button until the desired submenu name is displayed:
Next
.
Save Preset
3. Rotate either knob until the LCD screen displays the desired number of the user
Adjust
image preset to save the current settings to, or to be recalled.
4. Press to save or recall the preset. Then the operation is completed, the
Next
menu reappears.
Presets
To exit the input presets function without saving a preset, press
NOTES:
• The user image presets are saved in nonvolatile memory. Therefore, powering
down the MediaPort does not lose the presets.
• The user image preset name can be assigned only using SIS commands (see
User Image Preset Name
MediaPort 200 Help file).
• User image presets can be saved at one input resolution and rate and recalled
to a different one.
Example: If the current output resolution is 640x480 and a 720p input is
applied, size and center a "letterbox" image for a 16:9 input resolution and save
it to an user image preset. Subsequently, if a 1080p resolution is applied to the
unit, the letterbox preset that was saved at 720p can be recalled with the new
1080p input resolution.
Input Presets
Adjust
Save Preset
<Unassigned>
Next
Save the current input
settings to a preset.
Unassigned (Default)
•
Range: 1-16
•
is displayed in the LCD window.
Input Presets
on page 122) or the PCS control software (see
MediaPort 200 • Front Panel Operation
menu and submenus.
Recall Preset
Input
.
Menu
or
67