Input Presets Menu - Extron electronics MediaPort 200 User Manual

Performing Auto-Image
When Auto-Image is performed, the MediaPort 200 attempts to size and position the image
to fill the display screen (fill mode) or to use the native aspect ratio of the input (follow mode).
Using SIS commands or the LCD menus, a one-time Auto-Image can be performed on the
current input.
Only the horizontal and vertical positioning and the horizontal and vertical size are adjusted
by the Auto-Image. All other controls are left unchanged.
• If the aspect ratio has been set to
and V Size is set to match the current output rate.
• If the aspect ratio has been set to
maintain the native aspect ratio of the input rate with respect to the current output
resolution.
Auto-Image is useful in applications in which a variety of new input sources may be
encountered (such as when a matrix switcher is connected). It is also useful for centering
and sizing an image that has been adjusted out of default settings.
Auto-Image can be performed by the following methods:
LCD Menus
•
1. Press the front panel
2.
Press the
3. Rotate either
4. Press
5. Press
displays
After approximately 2 seconds, the screen displays the next menu (
EDID
• SIS commands — Enter
Auto-Image
(see

Input Presets Menu

Input (user image) presets save the video settings for the current input. Each input has 16
available user image presets which can save settings or recall using this menu or an SIS
command (see
in an user image preset:
• Preset name
• Contrast
• Brightness
• Horizontal position
Saved user image presets can be recalled to be applied to the current input.
Fill
Follow
button once to display the
Menu
button once to display
Next
knob to select
Adjust
. The LCD screen displays
Next
again. When the Auto-Image process is finished, the LCD screen
Next
.
Auto-Image Complete
). After another 30 seconds, the default cycle is displayed.
, using a communication tool such as Extron DataViewer
A
on page 119 for more information).
User Image Preset Name
, the H and V position returns to 0,0, and the H
, the H and V position and size are set to
Quick Setup
.
Auto-Image
.
<Yes>
Press Next to Start Auto-Image
on page 122). The following settings are saved
• Vertical position
• Horizontal size
• Vertical size
MediaPort 200 • Front Panel Operation
menu.
.
HDMI Input
66