Input Dsp Window - Extron electronics MediaPort 200 User Manual

Input DSP Window

The DSP window can be accessed by clicking the
page 51), and opens to the
DSP window. Each input channel contains its own DSP. All channels contain filter and
compressor DSP, with the
ducking as well.
Filters
Filter Graphic
A
Filter List and Parameters
B
Figure 57.
Filter Graphic — Visually represents the active and inactive filters from the filter list.
A
Also provides
and numbered sliders directly below the graph.
Filter List and Parameters— The Mic/Line input contains 5 slots for filters, while
B
the other line inputs contain 3. Each of the slots allows for any of the available filters
to be applied and adjusted. Any filter type can be assigned to any of the filter slots. All
parameters for each filter can be adjusted in this list. In addition, clicking the square in
the
Active
represents an engaged filter. Filters are inactive by default. Available filters include:
• High Pass
Low Pass
•
• Bass (Shelving)
Show Filter Selection and Parameters — When this button is engaged (blue) the
C
filter drop-down menus and available parameters are visible. When disengaged, the
filters and parameters are hidden. Filters and parameters are visible by default.
Copy and Paste — Allows a filter type and parameters to be copied and pasted from
D
one slot to another.
tab. Clicking the
Filters
USB Communications
DSP Filter Tab
,
Frequency Boost/Cut
column engages the selected filter. A blue square in the
MediaPort 200 • Product Configuration Software (PCS)
figure 56
icon (see
DSP
icon will hide the Input
DSP
and channels containing
Mic/Line
Show Filter Selection and Parameters
C
Copy and Paste
D
, and control for filters via handles in the graph
Q
• Treble (Shelving)
Parametric
•
on
F
column
Active
53