Extron electronics MediaPort 200 User Manual page 46

To update firmware via PCS:
1. Connect the MediaPort 200 to the host PC via the LAN port (see
page 21).
2. From the PCS main window for MediaPort 200 (see
the drop down triangle from the MediaPort 200 (see figure 37
3. From the drop-down list, select
( ).
3
Device
4. Click .
Continue
Figure 37. Accessing Update Firmware
5. From the
Update Firmware to This Device
Open Firmware File...
Program Files (x86) > Extron > Firmware > MediaPort
6. Select .
Open
7.
Select and the firmware will update. The front panel LCD on the MediaPort 200
Update
will read
Firmware Update Verify File
Firmware Update Installing
8. Finally, the MediaPort front panel LCD will read
reboot.
Figure 38. Update Firmware to This Device Dialog Box
figure 34
(
Update Firmware 2
dialog box, click
and browse the disk for the firmware file (default location is
with a completion percentage. Followed by
with a completion percentage.
Firmware Update Complete
MediaPort 200 • Product Configuration Software (PCS)
LAN Port on
on page 37), select
below).
1
) then
Update Firmware to this
).
and will
39