Quick Setup Menu - Extron electronics MediaPort 200 User Manual

Quick Setup Menu

Figure 66 below contains a selection of items that are also available on other menus. It
allows several basic configuration adjustments to be made to the MediaPort from the same
menu screen.
Next
Activate Auto-Image.
No
•
Yes
•
Test Pattern
Select a video test pattern.
• Off (Default)
• Crop
• Alt Pixels
Figure 66.
From this menu, the following can be configured:
Auto-Image — Performs a one-time Auto-Image on the video input (see
•
Auto-Image
Adjust
HDMI Input EDID — Select the Extended Display Identification Data (EDID) for the
•
input, or match it to the output rate (see
data). The default is
• Aspect Ratio — Specify how much of the display the image will fill. Rotate either
encoder to select
of the input).
• Test Pattern — Choose a test pattern to aid in setting up the MediaPort. Rotate either
encoder to select one of the available patterns:
Crosshatch
NOTE: On the LCD screen, a default value is indicated by an asterisk (
Default
Cycle
Menu
Quick Rotate either
Adjust
Setup knob to select a setting.
Next
HDMI Input EDID
Auto-Image
Next
<No>
Assign an EDID to the HDMI input.
See the Resolution and Refresh Rate
•
table on page 35 for a complete list
of available resolutions.
• Default: 720p @ 60 Hz
Aspect Ratio
Next
Off
Select the amount of the display
• Crosshatch the image will fill.
Fill (Default)
• Color Bars •
Follow
• Grayscale •
Quick Setup Menu
on the next page for more information about this function). Rotate either
knob to select or .
Yes No
720P @ 60 Hz
(fills the entire screen) or
Fill
, , and
Color Bars Grayscale
Next
720p@60Hz
Next
Fill
Input EDID Table on page 72 for EDID
.
(displays with the aspect ratio
Follow
(no test pattern),
Off
.
MediaPort 200 • Front Panel Operation
Performing
, ,
Crop Alt Pixels
) next to it.
*
65