Audio Config Tab; Input Tab - Extron electronics MediaPort 200 User Manual

Audio Config Tab

The
following sub-tabs:
•
•
This is a general overview of the audio controls. In-depth coverage of this topic can be
found in
MediaPort 200 with External DSP with AEC Application Setup
depending on your selected audio mode (see

Input Tab

The
audio inputs.
A
B
C
D
Figure 56.
A
tab contains all audio mixing and DSP for the MediaPort 200 within the
Audio Config
Input Tab
Mix Tab
Standalone MediaPort 200 Application Setup
tab `contains gain, attenuation, mute, and DSP settings for the MediaPort 200
Input
USB Playback Panel
HDMI Panel
Line In Panel
USB Communications Panel
Input Tab
USB Playback Panel — The
program audio played from the computer, and communications audio from a web-
based soft codec. This panel contains faders for attenuation of the incoming USB
playback audio from the host PC. At the bottom of the panel there are text fields for
entering desired attenuation levels, individual left and right
that ties left and right channels together, and Left/Right dBFS meters for monitoring
input signal level.
NOTE: If a web-based codec is being used for video conferencing, all audio may
be routed to the USB Playback panel. Only audio from a standalone Unified
Communications application is recognized as communications audio by Windows.
• Output Tab
• Preset and Digital I/O Tab
Setting Audio Modes
Mic/Line Panel
E
DSP Icon
F
panel provides level and mute control for
USB Playback
MediaPort 200 • Product Configuration Software (PCS)
on page 83 or
on page 93
on page 17).
buttons, a button
Mute Gang
51