How to use web browser to control your
projector
1. Turn on DHCP to allow a DHCP server to automatically assign an IP, or manually enter the
required network information.
2. Choose apply and press OK button to complete the configuration process.
3. Open your web browser and type the IP Address from the OSD LAN screen.
The web page will display as below.
When you used the projector IP address, you will can not link to your service server.
Based on network web-page for the input-string in [tools] tab, the limitation for Input-Length is
in the below list (space and the other punctuation key included):
Category
Crestron Control
Projector
DHD410S User Manual
020-001438-01 Rev. 1 (06-2018)
Item
IP Address
IP ID
Port
Projector Name
Location
Assigned To
Input-length
(characters)
15
2
5
10
9
9
User Controls
30