Inspect - Geely FC Workshop Manual

(a) Turn the ignition switch to OFF and open all doors, then lock driver cap side door.
(b) Unlock the drive's side door and open any door, then inspect whether room light lights. Close the door
and inspect whether room light lights off in 15 seconds.
(c) Turn ignition switch to ON, then open any door to inspect whether room light lights off immediately.
(d) Turn ignition switch to OFF.
(e) Open or close any door to light room light. Turn ignition switch to ON before room light turns off(about
15seconds) to inspect whether room light turns off immediately.
(f) Turn ignition switch to OFF.
(g) Open or close any door to light room light. Lock driver cap side door before room light turns off(about
15seconds) to inspect whether room light turns off immediately.

Inspect

1. Front combination headlight dimmer switch
assembly
(a) Inspect the conduction of light control switch
(1) Inspect switch on every positions, the conduction among
terminals as following table.
Switch positions
OFF
Position light
Lamp
Lamp
(b) Inspect conduction of front assembled dimmer switch
(1) Inspect switch on every parts, the conduction among terminals as following table.
Switch positions
Flasher
Low beam light
Distant light
(c) Inspect the conduction of turning light switch
(1) Inspect switch on every positions, the conduction among terminals as following table.
Switch positions
Turn right
neutral
turn left
Light--Light System
Avometer terminals
-
12-6
12-6
7-10
Avometer terminals
11-10
9-10
7-10
Avometer terminals
4-5
-
4-3
regular situations
not conduction
conduction
conduction
conduction
regular situations
conduction
conduction
conduction
regular situations
conduction
not conduction
conduction
283