Geely FC Workshop Manual page 45

(t) Check the matching marks on timing chain and cam-
shaft timing sprocket, and then align the groove of crank-
shaft pulley with the timing mark on timing chain hood
as shown in the diagram.
(u) Install chain tensioner.
(1) Check o-ring is clean, and buckle on the hook as
shown in the diagram.
(2) Coat engine oil on the chain tensioner, and then
install it.
Note: when installing the chain temsioner, buckle
on the hook again if plunger has ejected.
(3) Turn crankshaft counterclockwise to separate the
hook from lock pin on the plunger.
34
Engine mechanism - Valve clearance
Mark
Mark
Groove
Lifting
Pressing
in
Hook
Pin
Pressing in
Separation
Hook
Pin
Mark
Timing chain
hood surface
Turning