Geely FC Workshop Manual page 187

Transmission—Disassemble assembly
1 gear 2 gear
Measure axial clearance of 1 gear and 2 gear with thickness
gauge,
1 gear: 0.1—0.35mm
2 gear: 0.1—0.35mm
Measureradial clearance of 1 gear and 2 gear liking that shown
in figure, the maximal flop value is 0.056mm.
Take down tapered bearing liking that shown in figure
Note:
1. Hold the lower end of shaft to prevent it falling.
2. Clamp inner ring of bearing to make it reliable.
Disassemble tapered bearing on the other end with same
method.
176