Safety Belt; Note; Treatment - Geely FC Workshop Manual

Safety belt

Note

Hint:
When scraping a automobile equipping with safety belt pre-tension crimper, or disposing the safety belt
(equipping with safety belt pre-tension crimper), firstly, it is necessary to make by following steps.
If happening any abnormal phenomenon, please consult with GEELY automobile company.
When disposing a impacted automobile, and its safety belt pre-tension crimper did not explode, its treatment
step is same as the "Treatment step 1-(e)".
Warning:
Forbid disposing the safety belt pre-tension crimper that does not work.
When exploding the safety belt pre-tension crimper, it will produce big explosive noise, so this opera-
tion should be made out of automobile and in environment where will not influence near habitants.
When exploding the safety belt pre-tension crimper, it is necessary to use SRS airbag exploding
special tool, at the same time, the environment implementing this operation should be apart from
electronic interruption.
When exploding the safety belt pre-tension crimper, the environment implementing this operation
should be 10m apart from safety belt pre-tension crimper assembly.
When exploding the safety belt pre-tension crimper, safety belt will be very hot, please do not dispose
it in 30 minutes after explosion.
When disposing exploded safety belt pre-tension crimper, it is necessary to wear glove and safety
glass.
After finishing this operation, it is necessary to wash your hand with water.
Do not sprinkle water on exploded safety belt pre-tension crimper.

Treatment

1. Safety belt pre-tension crimper when scraping
automobile.
Hint: prepare a battery as the power to explode safety
belt pre-tension crimper.
(a) Confirm the function of special tool
Warning: when exploding safety belt pre-tension
crimper, it is necessary to use regulated special
tool: SRS airbag exploding tool.
270
Safety belt--Front safety belt
Special
tool
Special
tool
Battery