Geely FC Workshop Manual page 131

(e) Use clasp spreading pliers to assemble the clasp.
(f) Fill lubricating grease in inner joint assembly.
Left transmis-
mission shaft
sion shaft
A type
C type
B type
(g) Align the mark before disassembly, and assemble inner joint
in drive shaft.
29. Assemble dustproof cover inner joint of left front
drive shaft.
Assemble inner joint dustproof cover to inner joint and drive
shaft.
30. Assemble fixing clamp of dustproof cover inner joint
of left front drive shaft.
(a) Single-contact fixing clamp type:
Liking that shown in figure, use screw driver to assemble
fixing clamp of dust-proof cover inner joint .
(b) Mesh clamp type:
Liking that shown in figure, use pliers to assemble fixing
clamp of inner joint dust-proof cover.
31. Assemble No.2 fixing clamp of dust-proof cover in-
ner joint of left front drive shaft.
(a) Single-contact fixing clamp type:
Liking that shown in figure, use screw driver to assemble
No.2 fixing clamp of dust-proof cover inner joint.
120
Drive shaft--Front drive shaft
Right trans-
Capacity of lubricating grease
A type
180-190 grams
C type
B type 125-135 grams
Align the mark
Pliers
clamp