Geely FC Workshop Manual page 100

7. Adjustment of camber
Note: after adjusting the camber, please check toe-in.
(a) Remove front wheels.
(b) Remove 2 nuts under absorber.
If it is necessary to repeat using bolts or nuts, please coat
oil to thread of nuts.
(c) Clean nut absorber and attachment face of steering knucle.
(d) Temporarily install 2 nuts.
(e) Push or pull lower end of absorber in the direction that cam-
ber requires adjustment to adjust the camber.
(f) Tighten nut.
Torque: 153
(g) Install front wheels.
Torque: 103
(h) Check camber.
Front suspension - Front wheel alignment
10 N.m
10 N.m
89