Geely FC Workshop Manual page 126

(b) Mesh clamp type:
Liking that shown in figure, use pliers to disassemble No.2
fixing clamp of inner joint dust-proof cover of left front trans-
mission shaft.
12. Disassemble fixing clamp of inner joint dustproof
cover of left front drive shaft.
(a) Single-contact fixing clamp type:
Use screw driver to disassemble fixing clamp of inner joint
dust-proof cover.
(b) Mesh clamp type:
Liking that shown in figure, use pliers to disassemble No.2
fixing clamp of inner joint dust-proof cover.
13. Disassemble inner joint dustproof cover of left front
drive shaft.
Disassemble dustproof cover from left inner joint.
14. Disassemble inner joint of left front drive shaft.
(a) Remove old lubricating grease of inner joint.
(b) Make mark on inner joint and drive shaft.
Note: do not use punch to make mark.
(c) Disassemble inner joint assembly from drive shaft.
(d) Use clasp spreading pliers to disassemble the clasp.
Drive shaft--Front drive shaft
Pliers clamp
Pliers
clamp
Align the mark
115