Rear wheel alignment
Adjustment
1. Check tire (see Page 109).
2. Measure vehicle height (see Page 87).
Note: adjust vehicle height to standard value before checking
vehicle tire alignment.
3. Inspection of toe-in
Toe-in:
(General road)
Toe-in
(Total)
(Coarse road)
Toe-in
(Total)
If toe-in is not within specification, check and replace relevant suspension parts.
4. Inspection of camber
(a) Install camber-caster-kingpin gauge or erect wheel alignment tester.
(b) Check camber.
Camber:
(general road)
Camber
Left-right error
(Coarse road)
Camber
Left-right error
For camber could not be adjusted, therefore check suspension components are damaged or worn if
camber measuring value is not within specification, and replace parts if necessary.
Rear suspension - Rear wheel alignment
Front
27'
45'
'
101